DSG 250C hose crimper/hydraulic hose crimping (high speed, suit to elbow)

Description:

DSG 250C hose crimper
(high speed, suit to elbow)
Buckling hose :6 to 51 mm
buckling force: 570 ton
hydraulic hose crimping

DSG 250C hose crimper/hydraulic hose crimping (high speed, suitto elbow)

good mould made by linear cuting machine

DSG-250C Model pipe locking machine produced by our factory isapplicable for the fastening and pressing processing of the highpressure rubber hose, fiber pipe and plastic pipe assemblies in theindustry, agriculture and hydraulic transmission of engineeringmachine, and the machine has the following characteristics: havingsmall volume, light weight, many functions, and rapid opening ofdie, being easy to operate and convenient for maintenance andrepair and so on.

2. Main Technical Characteristics:

1. Inside Diameter of fastening the rubber hose: φ6 -φ51mm  2. Precision of Scale: 0.02 mm

3. Power: 4KW (Motor of Oil Pump)  4. Maximum Fastening andPressing Force: 540 T

5. Rated Pressure of Pump: 30 MPa  6. Oil Pump Output: 14L/min

7. Overall Dimension: 800 × 620 × 1300 (mm)  8. Weight: 200Kg

china crimping machine manufacturer oringing from 1978

We are appling CE certificate, factory founded in 1978 with morethan 30 years experience.

3.Technical data of hose crimpingmachine-DSG250C:

1. Crimp range	0.23" ~2"  4SP/φ6 - φ51mm
2. Precision of Scale	0.02 mm
3. Standard voltage & motor	220V, 50HZ /380V, 50HZ /4kw
4. Maximum Fastening and Pressing Force	540 T
5.Systematic pressure	30 Mpa
6, Oil Pump Output	14 L/min
7.Opening without dies	120mm
8.Opening	±25mm
9, No. of standard die set	10sets
10.L*W*H	800mm*620mm*1300mm
11.Weight	200Kg

4. Advantages ofhose crimpingmachine-DSG250C:: 

 1. larger crimping forece up to540T.

2. higher speed , good working efficiency , save time , use thesame time get you more money and more profit: Oil Pump Output: 14L/min

3, Good efficiency to crimp the elbow, for biger opening. Maxopenjing:120mm.     

4. using variable pump/ variable desplacement pump,have two types of speed, at the beginning with much quicker speedto save power, and when reach the hose, gradually with slower speedto crimp hose perfect, power saved and high speed.

5. with self-filling oil cup, the work surface canbe lubricated and never leakageoil.       

5. Installation and Experiment andAdjustment

1. Transportation: It is proper to use the fork-lift truck totransport the machine, and make the bottom of the machine understress. It is not allowed to make the body of machine incline. Itis strictly prohibited to move or lift the position of locking headand scale.

2. Installation: It is necessary to fix the machine horizontallyon the firm foundation, and connect the machine to ground.

6. Operation

1. When it is the first time to use the machine, it is necessaryto make the machine fasten and press without load for 20 - 30times. The machine can be used only after every part of machine isnormal by observing. If the pipe locking machine is used in winter,it is necessary to make the machine fasten and press without loadfor 20-30 times, in order to make the temperature of oil increaseslightly.

 

7. Test Example

The fastening and pressing of Φ19 layer rubber hose(manufactured according to JB1885-77 Standard)

 

china crimping machine manufacturer oringing from 1978

 

 

 

DSG 250C hose crimper/hydraulic hose crimping (high speed, suit to elbow)